Everything for Electronics

Signal Generators — Part 1
Workbench

Signal Generators — Part 1

Signal generators are devices used to make the signals used in testing and troubleshooting of radio receivers and other circuits, so are of primary interest to almost everyone interested in electronics.


The AC Volt
Theory

The AC Volt

In the US, the DC volt is legally defined by the Josephson array — a super conducting quantum device with a highly repeatable output voltage. Banks of standard cells and temperature-stabilized zener diode references are used by the National Institute of Science and Technology (NIST) to calibrate DC meters for scientific and industrial customers. So how is the AC volt defined?


The DC Volt
Theory

The DC Volt

How many times each day do you pick up a probe to measure a DC voltage? The meter reads, say 4.65 volts, and we usually accept it without question. But just what is a volt and how is it maintained? Here's a fascinating look at the search for increasingly more accurate methods of building a “standard volt.”


Meet the ESP8266
Hardware

Meet the ESP8266

It’s not all that often that a different piece of hardware comes along that immediately captures the attention of the builder community. The ESP8266 is an example of this. It’s only about the size of a nickel, yet contains a powerful 32-bit microcontroller and a Wi-Fi interface, plus you can buy it for under $10.


Raspberry Pi, Anyone?
Experimenter Platform

Raspberry Pi, Anyone?

The Raspberry Pi represents a breakthrough in low cost computing power. Get a piece of this popular DIY action by learning how to cook up your own RPi to start experimenting with.


The Edison Cell
Science

The Edison Cell

Perhaps one day soon we’ll have a battery that displays no “memory” effect; can be completely discharged or overcharged without harm; and require no complex computerized management system. Does such a battery sound like too much to hope for? Thomas Edison didn’t think so.


Build a Wall Wart Power Monitor
Workbench

Build a Wall Wart Power Monitor

As an experimenter, I use wall warts all the time to power circuit boards, microcontroller boards, and even finished projects. However, during the checkout phase of a new circuit, wall warts present a problem. How do you measure their output when they’re plugged into a board or project box?


Nuts & Volts Designer’s Guide to Reliable Oscillators and Timers — Part 1
Theory

Nuts & Volts Designer’s Guide to Reliable Oscillators and Timers — Part 1

Electronic designers are familiar with the apparent perversity of Nature in the tendency of amplifiers to oscillate and oscillators to amplify. But even the beginning designer knows that questions of oscillation and stability involve feedback — that ubiquitous structure in natural systems and many man-made ones — whereby a fraction of the system’s output energy is fed back to the input to produce useful effects.


Shop Best Sellers in THE Electronics Hobbyist JUNKBOX

The Official Webstore of Nuts & Volts and SERVO Magazine

Nuts & Volts On CD-ROM

Get a years' worth of Nuts & Volts issues on each CD-ROM. In easy to store, portable, searchable, PDF format.

$24.95

Practical Electronics for Inventors, 4th Edition

Set up your own home electronics workshop and invent, design, build, test, and repair electronic circuits and gadgets.

$40.00

3D LED Cube Kit

Construct this eye-catching 4 x 4 x 4 monochromatic LED matrix that will give you hours of enjoyment and entertainment.

$59.95