PICAXE Primer
Nuts & Volts Magazine (August 2011)
By
Ron Hackett
Using EEPROMs to Store and Retrieve Data.
:::
Read This Article!
If you’re a subscriber to this issue of Nuts & Volts, or a member of our Preferred Subscriber Network, you can read this article in our digital edition by clicking the blue icon in the upper right corner. Use the same login information you use to access your subscriber account. If you’re not a subscriber, you can still view a few sample pages online or subscribe here for full digital access and/or print delivery.
Downloads
PICAXE Primer Code 201108
download
Article Comments
Use this area to comment on the article. To discuss the article with others, please visit our Forums. If you have questions regarding this article, please e-mail the Editor.
Great Timing Ron. Last month I completed the integration of a DS1307 RTC and HMC6352 Compass on PICAXE 20X2 I2C. Added a LM34 and Serial 2X16 LCD giving a super Time/Date/Temp/Heading console for my VW poptop. Adding the 24LC256 eeprom for data capture gave me some trouble with hi2setup but once figured out the eeprom worked fine. Your article is 100% correct but arrived a week after I finished. Super, the info on byte and page memory access was very helpful. Now I’m inspired to make use a new picaxe 08x with I2C interface to a standard 2X16 parallel LCD. Thanks for the article.
Posted by billacj on August 2, 2011 at 9:27 AM PST
You must be logged in to post a comment.