Programming the MAX7219 LED Display Driver

 

Nuts & Volts Magazine (April 2010)

By Ron Hackett

This month, we’ll experiment with three different programs for our display and one for our 28X1 master processor. First, we’ll try out a simple program to count from 0 to 9999, and then we’ll throw in a little “zero-blanking” for good measure.

:::

Read This Article!
If you’re a subscriber to this issue of Nuts & Volts, or a member of our Preferred Subscriber Network, you can read this article in our digital edition by clicking the blue icon in the upper right corner. Use the same login information you use to access your subscriber account. If you’re not a subscriber, you can still view a few sample pages online or subscribe here for full digital access and/or print delivery.