By Paul Florian View In Digital Edition
If you would like a circuit that is useful in obtaining a high-accuracy, low distortion RF source capable of driving a 50 ohm load, then you’ve come to the right place. The circuit in Figure 1 is the schematic for a common collector series tuned Colpitts crystal oscillator.
:::
Read This Article!
If you’re a subscriber and your subscription includes this issue of Nuts & Volts, you can read this article in our digital edition by clicking the blue icon in the upper right corner. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue icon let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
