This project was built for field troubleshooting and replaces blown fuses until the problem is solved. By dialing in the amperage, you can preset the drop-out point in the place of a fuse (200 mA – 5 amps). It is also known as a programmable relay. It displays the active AC or DC amperage being drawn when in the circuit.
Read This Article!
If you’re a subscriber and your subscription includes this issue of Nuts & Volts, you can read this article in our digital edition by clicking the blue icon in the upper right corner. Use the email address associated with your subscriber services account to login.
If you're a member of our Preferred Subscriber Network, not only will the magic blue icon let you read this article, but EVERY article in EVERY issue is yours to enjoy! Over a decades worth of content is stored in our digital archive!
If you’re not a subscriber, you can still view a few sample pages of our digital edition or subscribe here for full digital access and/or print delivery. Also, as you browse around our site, you will find selected articles have been posted in their entirety for you to enjoy.
Refuseable - Download