Are you bored with conventional two-dimensional circuit layouts, or looking for a way to add an artistic flair to your next project? I’ve taken point-to-point construction style a step further by making it self-supporting, which opens up a wide range of physical circuit topologies. (Point-to-point construction usually uses supporting structures like terminal strips that are functional but not pleasing to the eye.) I call this construction style the copper cobweb. Here’s how to do it.
I’ll show you two examples of circuits that don't use a micro but are often built with one, and explain some of the logic and theory behind these circuits.
I can hardly imagine an electronics enthusiast without some sort of test bench. This can be as simple as a folding table and a couple of hand tools, along with a cheap DMM (Digital MultiMeter). Or, it can be as elaborate as a spare room just loaded with TE and a full complement of tools and accessories to go with it.
Signal generators are devices used to make the signals used in testing and troubleshooting of radio receivers and other circuits, so are of primary interest to almost everyone interested in electronics.
I love restoring old electronic equipment. A while ago, I was excited to find a vintage Heathkit EC-1 analog computer for a reasonable price on eBay. It definitely needed a little TLC. Here’s how I brought it back to life.
In the US, the DC volt is legally defined by the Josephson array — a super conducting quantum device with a highly repeatable output voltage. Banks of standard cells and temperature-stabilized zener diode references are used by the National Institute of Science and Technology (NIST) to calibrate DC meters for scientific and industrial customers. So how is the AC volt defined?
How many times each day do you pick up a probe to measure a DC voltage? The meter reads, say 4.65 volts, and we usually accept it without question. But just what is a volt and how is it maintained? Here's a fascinating look at the search for increasingly more accurate methods of building a “standard volt.”
It’s not all that often that a new piece of hardware comes along that immediately captures the attention of the builder community. The ESP8266 is the newest example of this. It’s only about the size of a nickel, yet contains a powerful 32-bit microcontroller and a Wi-Fi interface, plus you can buy it for around $4.
The Raspberry Pi represents a breakthrough in low cost computing power. Get a piece of this popular DIY action by learning how to cook up your own RPi to start experimenting with.
Perhaps one day soon we’ll have a battery that displays no “memory” effect; can be completely discharged or overcharged without harm; and require no complex computerized management system. Does such a battery sound like too much to hope for? Thomas Edison didn’t think so.
As an experimenter, I use wall warts all the time to power circuit boards, microcontroller boards, and even finished projects. However, during the checkout phase of a new circuit, wall warts present a problem. How do you measure their output when they’re plugged into a board or project box?
Perfect for kids (or adults who act like kids!). When triggered by the motion sensor or via the push-button switch, this mini animatronic system moves servo motors, lights LEDs, and plays back the sounds you record!
Order a years' worth of Nuts & Volts on CD-ROM. In easy to store, portable, searchable, PDF format.
The Macchiato Mini Synth is a fun, great-sounding, easy-to-use versatile little 8-bit synthesizer that fits in the palm of your hand.